home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Network Support Library
/
RoseWare - Network Support Library.iso
/
mhs
/
mhs173.exe
/
MHS15D-N.EXE
/
SYS.EXE
/
README.DOC
< prev
next >
Wrap
Text File
|
1993-08-03
|
27KB
|
643 lines
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* NETWARE MHS 1.5 *
* Copyright (C) 1991-1993 by Novell, Inc. *
* RELEASE NOTE *
* July 30, 1993 *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
NetWare(R) MHS(tm) Network Edition
Software v1.5N Revision D
The NetWare MHS Network edition software uses the Standard Message
Format (SMF) to provide DOS-based messaging services on NetWare
networks. NetWare MHS transfers information including addresses, text,
and other data from an MHS-compatible application or gateway to
applications and gateways at other locations. MHS uses a
store-and-forward communications method, which transports messages
across a broad range of data-communications networks. Other
applications provide services - such as electronic mail - that allow
users to create and process messages.
This revision of NetWare MHS v1.5 includes public hub support. It
allows users of MHS-compatible applications to communicate with each
other through third-party hub services such as the CompuServe MHS
Service.
Please read this entire release note before upgrading your NetWare MHS
software.
If you have any questions or comments, please contact:
Customer Support Response Center
Novell, Inc.
2180 Fortune Drive
San Jose, CA 95131
If you need information about the Novell mail hub (NHUB) or about
registering your workgroup, call the Messaging Hotline at the following
number:
(408) 473-8989
To register your workgroup, you can send an MHS mail message to
hubadmin@NHUB. In the message, include your workgroup name, your
contact phone number, and the name of the contact person in your
organization.
If you need technical support, call one of the following numbers:
(800) NETWARE
(801) 429-5588
For other information, send a fax to the attention of the MHS Product
Manager at the following number:
(408) 433-9827
For support using the CompuServe MHS Service, you can call CompuServe
directly at:
CompuServe US Customer Service
Within US (toll-free) - 800-848-8990
Outside US - (614) 457-8650
CompuServe UK Customer Service
Within UK (toll-free) - 0800-289-378
Outside UK - (44) 272-255111
CompuServe Europe Customer Service
Within Germany (toll-free) - 0130-37-32
Within Switzerland (toll-free) - 155-31-79
Outside Germany and Switzerland - (49) (89) 66550-111
Or, you can send mail to:
SUPPORT@CSERVE
from an MHS site connected to CompuServe, or
>MHS:SUPPORT@CSERVE
from other CompuServe Mail products.
For information on how to send mail from MHS to CompuServe mail, please
read the <mv>\MHS\SYS\MANUAL.DOC file.
COMPONENTS
----------
NetWare MHS v1.5 Rev. D (Network edition) consists of these components:
o README.TXT (this release note)
o UPGRADE.EXE
o EXE.EXE
o SYS.EXE
SYSTEM REQUIREMENTS
-------------------
The NetWare MHS v1.5 Rev. D (Network edition) upgrade requires the
following hardware and software:
o A NetWare file server running NetWare MHS v1.5N, Rev A or Rev B.
If this copy of the Network edition will be using an asynchronous
connection on the client workstation, it also requires the following:
o An available serial communications port (COM1,
COM2, COM3 or COM4)
o A modem from the list of modems in the section "Communication
Enhancements and Improvements."
o CompuServe User-ID and Password for each host that
will be connecting to CompuServe
UPGRADING YOUR HOST
-------------------
The following sections describe the steps you must perform before
and after upgrading your host from an earlier revision of NetWare MHS
v1.5.
Before Upgrading Your Host
--------------------------
1. Upgrade Routing Internet Hosts First. Before you upgrade a
nonrouting internet host, upgrade its primary host.
2. Stop Mail Processes. Stop all mail processes (Connectivity
Manager, secondary Transport Servers and applications). If you
have mail pending for other hosts, force that mail to be
delivered before upgrading your host.
3. Rebuild Queues. Rebuild all existing queue files to ensure they
are in the correct format. Use the Rebuild all queues option
from the MHS Utilities menu.
4. Back up the existing SYS, MAIL and EXE subdirectories before
proceeding with the upgrade.
Upgrading Your Host
-------------------
Follow the instructions below to upgrade your host.
1. Set the MV environment parameter to point to the path containing
the MHS subdirectory. For example, if NetWare MHS is installed
in ADMIN/SYS:MAIL, enter the command "SET MV=ADMIN/SYS:MAIL".
2. Run UPGRADE. The UPGRADE program warns you to back up the SYS
and EXE subdirectories, and displays the path constructed from
the MV environment parameter. It prompts, Is it OK to continue
(Y/N):
3. Type "Y" if you have performed the backup, and if the target
directory is correct. Otherwise, type "N".
If you enter "Y" in response to the previous prompt, the program
upgrades your NetWare MHS installation.
4. If you plan to connect to the CompuServe Mail hub, print
MANUAL.DOC, located in the <mv>\MHS\SYS directory, and follow
the instructions in that document. It will tell you how to
configure the CompuServe Mail Hub and register your workgroups
and hosts with CompuServe.
5. Run the Directory Manager at least once after upgrading your
host. The Directory Manager automatically updates the MHS
version number and serial number in the Routing Directory
(NETDIR.TAB).
DOCUMENTATION CORRECTIONS
-------------------------
This section provides updates and corrections to the NetWare MHS
Installation and Operation guide.
Passwords for Asynchronously-Connected Hosts
--------------------------------------------
The NetWare Installation and Operation guide incorrectly describes how
to define passwords for hosts with which you communicate asynchronously.
You can define a Password for access to hubs in the MHS HOST SETUP form.
This is the password that the local host transmits when it communicates
with a remote host. (It transmits the same password to all the remote
hosts with which it communicates.)
For each remote host the local host calls, and for each remote host that
calls the local host, you can define a Password (in the A HOST THAT THIS
HOST PHONES and the A HOST THAT PHONES THIS HOST forms, respectively).
This Password must match the password defined in the Password for access
to hubs field in the remote host's HOST SETUP form.
If you do not define the remote host's password at your local host, MHS
will take the password transmitted by the remote host in the next
communication session, and write it in the Password field of the A HOST
THAT THIS HOST PHONES or the A HOST THAT PHONES THIS HOST form.
Once a password has been assigned to a remote host, the remote host
administrator must notify you of changes to the password. When the
remote administrator changes the password in the Password for access to
hubs field, the local administrator must change the Password field in
the A HOST THAT THIS HOST PHONES or the A HOST THAT PHONES THIS HOST
form for the remote host. Otherwise, if Require Password is set to
"Yes," a password mismatch will occur, and the hosts will be unable to
establish a communication session.
Similarly, when you change the password in the Password for access to
hubs field, you must ask the administrator of the remote host to update
the Password in the form for your host.
To understand how passwords work, consider "Eng," a host that calls
another host named "Sales." Sales has chosen "salpas" as its Password
for access to hubs, and Eng has chosen "engpas" as its Password for
access to hubs. These passwords are defined in the HOST SETUP form.
The administrators at Sales and Eng can get together and coordinate
passwords. Sales' administrator enters "engpas" in the Password field
of the A HOST THAT THIS HOST PHONES form that defines the route to Eng.
And Eng's administrator enters "salpas" in the Password field of the A
HOST THAT PHONES THIS HOST form that defines the route to Sales. Both
administrators can also set Require Password to "Yes."
One or both administrators can choose not to define the password for the
other host. If they leave the Password for the remote host blank, MHS
will insert the password it receives during the next communication
session. During this session, Eng's host transmits its password.
Sales' host enters the password received from Eng in its routing table,
and sends its password to Eng's host. Eng's MHS enters the Sales
password in its routing table, and continues the transmission.
From now on, if either administrator changes their host's Password for
access to hubs, they must ask the other administrator to change the
Password field in the A HOST THAT THIS HOST PHONES or A HOST THAT PHONES
THIS HOST form for the remote host.
96V32 and 96V32HUB Modem Driver
-------------------------------
The 96V32 and 96V32HUB are not drivers for the Hayes Smartmodem, as
stated in the NetWare MHS Installation and Operation guide. They are
drivers for the Hayes V-series ULTRA modem.
FEATURES OF NETWARE MHS v1.5 REV. D
-----------------------------------
NetWare MHS v1.5N Rev. D incorporates the following new and revised
features.
Communication Enhancements and Improvements
-------------------------------------------
NetWare MHS v1.5 includes the following enhancements and improvements
for communication between hosts:
o Connection to CompuServe. Through NetWare MHS v1.5 Rev. D, you
can use the CompuServe Mail Hub to route mail between NetWare
MHS workgroups, members of the CompuServe Information Service,
and other users of CompuServe Mail.
o Session Recovery. The Connectivity Manager resumes
transmissions where it left off when a broken transmission
restarts.
o Abort and Retry Captured. When a network error occurs, the I/O
operation is retried. If the retry count has been exhausted,
the Connectivity Manager or gateway is restarted. The
Abort/Retry counter is reset after a successful connection.
o Retry Counter Reset. The Retry counter now resets after a
successful connection to another host. Previously, this
function was disabled.
o Expanded Serial Port Support. NetWare MHS supports modems on
serial ports COM3 and COM4.
o Multiline Hub Support. This edition supports up to sixteen
lines. You do not need to purchase a separate multiline
package. (However, you must have a dedicated workstation for
each line.)
o Support for 9600 Baud Modems. NetWare MHS v1.5 supports 9600
baud modems.
o Improved Modem Support. To support new modems with software
UARTs that use only one stop bit for communication, NetWare MHS
v1.5 uses only 1 stop bit. It also supports modem definitions
with large command sets. Included with this release are
versions of the MHS v1.5 modem drivers that handle hang-ups
properly with CompuServe. If you are using any of the drivers
that came with your MHS v1.5 Rev. A software, you must use the
equivalents included with this release.
o Support for Additional Modem Drivers. NetWare MHS now supports
the following modem drivers:
2400B For Hayes Smartmodem 2400 and Hayes-compatible modems
operating at 2400 baud. Use for calling hosts only.
2400B-CE For modems bundled with the COMPAQ LTE. Try using
the CMPQLTEB modem driver first.
2400BHUB For Hayes Smartmodem 2400 and Hayes-compatible modems
operating at 2400 baud.
96V32 For Hayes V-Series ULTRA 9600 modems. Use for calling
hosts only.
96V32HUB For Hayes V-Series ULTRA 9600 modems.
BULLET96 For E-Tech BulletModem E9696M modems without MNP.
BULLETEC For E-Tech BulletModem E9696M modems with MNP.
COMPQLTEB For modems bundled with the COMPAQ LTE. Try this modem
driver first; if port off-line or other messages
appear, try using 2400B-CE.
CODX3220 For Codex 3220 modems.
CODX3260 For Codex 3260 modems.
DISABLED To disable asynchronous activity. For hosts that do
not exchange messages with remote hosts through
telephone calls.
FAXMDM For generic SendFax-compatible modems.
HAYESMAN For Hayes-compatible modems that require telephone
numbers to be dialed manually.
HAYES-UN For Hayes-compatible modems operating at speeds up to
2400 baud.
HAYESX24 For generic Hayes-compatible 2400 baud modems.
HAYESSM For Hayes Smartmodem 2400 modems.
HSTD-HUB For US Robotics COURIER HST modems with MNP.
HSTDNMNP For US Robotics COURIER HST modems without MNP.
HULTRA For Hayes V_Series ULTRA Smartmodem 9600 modems.
Replaces the 96V32 and 96V32HUB drivers.
INTELFAX For the Intel SatisFAXtion board.
INTELV32 For Intel 9600EX modems.
MICROCOM For Microcom QX4232HS modems.
MULTEC For MultiTech 932/224 modems. This driver does not
alter Novram setup.
MULTECNR For MultiTech 932/224 modems. This driver alters
Novram setup.
MULTEC20 For older MultiTech 224 modems. This driver does not
alter Novram setup.
NEC9631 For NEC 9631 modems.
NEC9632 For NEC 9632 modems.
NULLMDM For hosts with a direct cable connection between their
communication ports. You can use NULLMDM as a platform
for developing modem-control files.
PP96-HUB For Practical Peripherals PM9600SA modems. Use for
both hubs and calling hosts.
UDS322X For Motorola UDS v. 3224/3225 and Codex 1133 modems.
This list supersedes the one in Appendix C of the NetWare MHS
Installation and Operation guide.
Note: If you want to use one of these modem drivers, refer to
the MODEM.DOC file in the <mv>\MHS\SYS directory for
installation instructions.
SMF Enhancements and Improvements
---------------------------------
NetWare MHS v1.5 includes the following enhancements and improvements to
the SMF standard:
o Support for Extended Addresses. While MHS v1.5 Rev. D does not
use extended addresses to route messages, it now examines
extended address elements in braces ({ }) when checking for
duplicate addresses.
For example, a message contains the following addresses:
mail@fax {FAX: 1-408-555-1212}
mail@fax {FAX: 1-408-555-1211}
Previously, MHS would compare only the base address (mail@fax).
Since the base address is the same in both instances, MHS v1.5
would only deliver one message, containing the first address, to
the fax gateway. MHS v1.5 Rev. D recognizes the two addresses
as distinct, and delivers two copies to the fax gateway. Note
that MHS does not interpret the contents of the braces; it only
detects that they are different. Thus, if in the above example,
the addresses were:
mail@fax {FAX: 1-(408)-555-1212}
mail@fax {FAX: 1-408-555-1212}
then MHS would send two copies.
This change supersedes the information in the SMF v70
Programmer's Reference.
GENERAL INFORMATION
-------------------
The following information applies to networks running NetWare MHS v1.5.
User Interface Information
--------------------------
The following information applies to the user interface in NetWare MHS
v1.5:
o Monochrome Monitor Problems. The MHS screens may be difficult
or impossible to read on certain VGA monochrome monitors. If
you experience this problem, use the following MODE command at
the DOS prompt before running MHS:
MODE=bw80
o Color Monitor Problems. If the colors on an application display
incorrectly after you run MHS, use the following MODE command at
the DOS prompt before running your application:
MODE=co80
o Null Username. The Directory Manager treats "" (null; a
username with no characters) as a valid username. Therefore,
check to make sure you have specified a username before you add
a new user.
o Host and Queue Review in a Multiline Installation. If you have
a multiline installation and you select Review a host's route
and queues from the MHS Utilities menu while that host is
connected to another transport server, you will receive the
message:
missing 'd:\MHS\MAIL\QUEUES\hostname.?' discard queue?
If you answer "Yes," MHS will discard the queue for that host.
To avoid this situation, always check incoming lines to see if
hosts are connected before you select this option.
o Connection Activities Window. You cannot view the Connection
Activities window twice in a row.
o Default Primary Host. In new installations, the default primary
host for non-routing internet hosts is NHUB. If you accept the
default value, mail will not be delivered to or routed from the
non-routing host.
Communications Information
--------------------------
The following information applies to communications between hosts
running NetWare MHS v1.5.
o Internet Retries. When a NetWare MHS host fails to connect to
another internet host, it will retry 15 times. The Connectivity
Manager appears inactive for a few minutes during the retry
attempts.
o Insufficient Disk Space. If a remote internet file server has
insufficient disk space during a connection, MHS might not
transfer mail. MHS transfers the waiting mail during the first
internet connection after sufficient disk space is made
available. If any of the mail includes attachments, the
administrative user and the sender(s) on the originating
internet host might receive an erroneous message that an
attachment is missing.
o Deactivated Hosts. When mail is waiting to be delivered to a
deactivated passive internet host, forcing a connection
transfers the mail but does not reactivate the internet host.
To reactivate the host, force a connection a second time, when
there is no mail waiting.
o Modem Speed Sensing. The superseded modem drivers for the Hayes
V-Series ULTRA 9600 modem (96V32 and 96V32HUB) do not sense
speed. As a result, they are unable to answer an incoming call
at 1200 or 2400 baud. If you want speed sensing, use the HULTRA
modem driver.
o 9600 Baud Modem Support. PCs with 8088 processors running at
the 4.77 MHz clock speed are not fast enough to use 9600-baud
modems.
o Inaccurate Estimated Transfer Time. MHS attempts to estimate
the amount of time an asynchronous transfer will take. It often
estimates incorrectly, especially for high-speed modems.
Disk Space and Memory Requirements
----------------------------------
Disk space and memory requirements for NetWare MHS v1.5 have changed, as
follows:
o Statistics Gathering. Because NetWare MHS v1.5 gathers
statistics more comprehensively, statistics files require more
disk space. Monitor disk space usage carefully.
o Memory Allocation Error. If the NetWare MHS workstation has a
limited amount of available memory, and a large number of files
accumulate in the SND directory, a memory allocation error
occurs. Delete any *.BAD files in the SND directory and, if
possible, terminate memory-resident programs sharing the MHS
workstation. Do not run MHS from a shell.
o Disk Space Management. If MHS terminates abnormally, it might
be unable to remove temporary files created in the <mv>\MHS\SW
subdirectory. Check this subdirectory from time to time, and
delete all files except SWAP.FLG. Note: Do not delete these
files while MHS is running.
Network Information
-------------------
The following information applies to NetWare MHS v1.5 running on a
NetWare network:
o Free Drive Letters. At least 5 free drive letters must be
available before you run the Connectivity Manager.
o Lost Connection to Your Local File Server. If a network error
occurs, and you lose connection to your local file server, MHS
displays a message indicating that it cannot find MHSN.OVR. In
this case, log in to your file server again, and then restart
MHS.
o The MAIL Variable. While it is possible in the Network edition
to specify the MV variable for one drive and the MAIL variable
for another, you must map both to network drives. You cannot
specify local drives. (Appendix A of the NetWare MHS
Installation and Operations guide incorrectly implies that you
can use a local drive.) Note that the path you specify for the
MAIL variable must be in valid DOS format (for example,
F:\MAIL). The path specified for the MV variable can be in DOS
or NetWare format (for example, FS1/SYS:APPS).
o Password Length under NetWare v3.11. NetWare 3.11 passwords
must be five or more characters. MHS sets the default password
for the mail area to be MHS. This password works with NetWare
v3.11; however, if you change the password, the new password
must be five or more characters long. You must provide the
password information to the administrators of the hosts that
call or log in to your host. You should change the password
after installation to ensure security.
o NetWare 4.0 Support. This release does not support NetWare 4.0.
If you are using NetWare 4.0, contact your distributor to obtain
the NetWare Global MHS product for the NetWare 4.0 operating
system.
Other Information
-----------------
The following information applies to NetWare MHS v1.5:
o Invalid Remote Host Name. MHSUSER does not prevent you from
adding an invalid remote host name (for example, a name
containing invalid characters) to the Routing Directory. To
avoid confusion and routing problems, delete invalid host names.
FIXES IN THIS REVISION
----------------------
1) When MHS messages are upgraded from SMF-64 to SMF-70, MHS might
reject the message indicating "Bad Expiry Date Header". This
problem occurred every 256 days; the last known date on which it
occurred was January 7, 1992.
2) MHS would fail when it connected to the Compuserve Mail Hub from
outside the United States, if the connection was made through a
data network that uses 7-bit data.
3) Although it was using the "DISABLED" modem driver, MHS would
still require the selected COM port to be present, and would
alter the settings of that COM port. MHS no longer accesses the
COM port when using the "DISABLED" modem driver.
4) Under some circumstances, the MHS workstation would hang if
activity occurred on the COM PORT while a gateway was running.
5) Sometimes during message queue transfers, the warning message
"Dangerous stuff" would appear. The condition causing this
problem has been eliminated.
6) Disk write errors that occur during INET message deliveries
are no longer considered fatal errors. MHS will now count that
as 1 failed connection attempt and continue processing.
7) Some common INET delivery errors used to cause immediate
deactivation of the INET host. All errors now accumulate as
single failed connections and the host is deactivated when the
system retry limit is reached.
8) Hosts are no longer deactivated when a login to a remote host's
server fails. All errors now accumulate as a single failed
connection and the host is deactivated when the system retry
limit is reached.
9) On faster machines, the Connectivity Manager would sometimes
terminate with a fatal runtime (division by zero) error.
10) Mhsuser - Option -X01 - When defining a new user of an
application, mhsuser would allow you to add users if you
provided an undefined application. MHSUSER will no longer
allow you to define a user to an undefined application.
11) Mhsuser - Option -X31 - The switch -NS for adding / modifying
information for the CompuServe host's configuration would only
work for the initial creation of the Cserve host. MHSUSER
now lets you add and modify the information for the CompuServe
host.
TRADEMARKS
----------
Novell, the N design, and NetWare are registered trademarks and NetWare
MHS is a trademark of Novell, Inc.
Codex is a registered trademark of Codex Corporation. COMPAQ is a
registered trademark of COMPAQ Computer Corporation. CompuServe is a
registered trademark of CompuServe, Inc. E9696M and BulletModem are
trademarks of E-Tech Research, Inc. Hayes and V-series are registered
trademarks and ULTRA and Smartmodem are trademarks of Hayes
Microcomputer Products, Inc. Intel is a registered trademark and
SatisFAXtion is a trademark of Intel Corporation. IBM and PS/2 are
registered trademarks of International Business Machines Corporation.
Microcom and MNP are trademarks of Microcom, Inc. MS-DOS is a
registered trademark of Microsoft Corporation. Motorola is a registered
trademark of Motorola, Inc. NEC is a registered trademark of NEC
Corporation. Practical Peripherals is a registered trademark and
PM9600SA is a trademark of Practical Peripherals, Inc. USRobotics is a
registered trademark and COURIER, HST, and ASL are trademarks of U.S.
Robotics, Inc.